Daktronics

How to set up task scheduler on SBC

Topic

  • How to set up task scheduler on SBC
  • How to check the auto power cycle on the display

Environment

  • Product Family: Transportation
  • Product: Data Display
  • Components: SBC, AF-6710, AF-6711
  • Control System: DVS

Steps

  1. VNC into the display.
  2. Restart windows(to clear out any EWF overlay)
  3. Log into SBC again with VNC.
  4. Disable the write filter
  5. Run the task scheduler
    Task Scheduler.PNG
  6. Click on DAK folder.
  7. Select Import Task.
    Import.PNG
  8. Navigate to Scheduled-Tasks folder.
  9. From here you can set up Auto-Restart or Auto-Time-Synch.
  10. Open the task you want to set up.
  11. When it opens go to Triggers.
  12. There you will be able to set up the time you want the feature to trigger.
  13. After these are set up you will want to Enable the write filter.

KB ID: DD3834107

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.