Display Studio monitor wall groups of displays

Topic

This monitor wall functionality is targeted for systems with a large number of displays/zones that may be using multiple operators.  Large systems face challenges configuring their monitor wall in a way that all the displays are viewable at one time.  Multiple group monitoring allows operators to setup multiple groups of displays that can be switched between on their monitor wall depending on their operating needs.

The Display Studio's built-in "Monitor Wall" delivers confidence by letting you see all your displays or zones right from your user interface.

Environment

  • Product: 
  • Components: Display Studio Monitor Wall
  • Control System: Show Control System (SCS) version 2.25+
DisplayStudio-Logo_Blue.png

Steps

Set up the monitor wall

For the basics, see: Display Studio Monitor Wall: How do I setup?
Note, if you upgraded Show Control from a previous version without monitor wall groups, the update will default the current monitor wall configuration into Group 1.  This can be edited and renamed as needed.  
 
To create groups, Right-click in the monitor wall and select Properties to open the Monitor Wall Properties pane.
  1. Add a new group or choose an existing one to edit.
  2. Add displays to the monitor wall.  
  3. If needed, adjust the display's alias to something the operator can recognize.  
  4. Save changes. 

Displaying the groups on the monitor wall

Switch between monitor groups from the drop down or the via the hot keys.  

KB ID: 000019855


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.