Diagnostic Event: Loss of Sync ProLink 6, Port A or B event on PLR
Potential Symptoms
- Potential poor image quality. A single loss of sync it not likely to cause visual problems for a display, but if multiple losses of sync occur in a ProLink6 circuit, all modules associated with the nodes between the points of failure may go blank.
Diagnostic Event(s)
- Loss Of Sync ProLink 6 diagnostics alert (port A or B) on PLR.
Environment
- Product: System Health, IDM
- Component: PLR, DB-4000, DB-4200, DB-5000, DB-6000, DB-6400, GS6, GT6, GalaxyPro
- Control System:
The PLR receives ProLink6 data on two ports - A and B. A loss of sync on one port will cause the PLR to switch to the other port. While a loss of sync itself is a non-visual event, it may be caused by the reset or failure of a ProLink6 node (PLR or VIP-4060) directly connected to the PLR, and therefore may be an indirect indicator of a visual outage.
A persistent loss of sync on a ProLink6 circuit indicates that data redundancy has been lost. Another loss of sync on the same circuit will result in a visual outage affecting all nodes between the two points of failure.
Cause
- This event is created if the ProLink Router (PLR) detects that it is not receiving a ProLink6 signal on Port A or B, causing it to increment a counter.
Resolution
- Look for events indicating that the ProLink6 node connected to Port A or B of the PLR experienced a reset or diagnostic failure, and use the display's webcam to determine if there are any visual issues occurring on the display.
- If no such events exist, inspect the fiber optic cable connection between the PLR and the ProLink6 node connected to ports of the PLR.
- Reseat or replace fiber between PLR and next device in the signal chain (PLR or VIP).
Related Resources
KB ID: DD4304705
DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.
DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.
The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.