Daktronics

DMP-8000: How do I enable Audio/Video offset control on a DMP

Topic

  • Add time offset or delay between the audio and the video coming out of a DMP 8000 so that I can adjust how well they match up at different distances away from the video board.

Environment

  • Product Family: Software, Control Systems
  • Product:
  • Component: DMP-8000 7.20.0.29 and above
  • Control System:

Steps

VERSIONS 8.18 AND ABOVE FOLLOW DMP-8000: How do I configure audio settings for player outputs?

VERSIONS  7.30 TO 8.17.0.61

  1. Locate the Advanced configuration page after logging into the webpage.
  2. Hit CTRL+ F and search for audio.
    First entry should be enabled.
  3. Second entry will show Mode: XXXXX.
    Hit the (-) symbol for the drop down menu.
    4-2-2018 12-47-30 PM.png
  4. Format should be ISO for either Delay or Stream/Offset Example PT0.5S for a half of a second delay.
 
Note: If configuring for an audio offset and the player has a Fusion connection with Venus, ensure that Venus has been updated to the latest version (0.1.634.0 or higher) to ensure that the config scheme contains the StreamOffset value. If not updated, if a Venus config is sent, it will reset the StreamOffset to 0. 
 

VERSIONS BELOW 7.30

  1. Go to the DMP 8000 Silverlight configuration web UI.
    Note: The existing Silverlight UI will be located at "http://PLAYER-IP/Old-UI" or by clicking the "legacy" icon in the right menu.
  2. On the advanced configuration page, find the DislpayOutputType element and add the Audio element if it does not already exist.
  3. On the Audio element, add the StreamOffset element.
  4. Set this value to the approximate number of seconds required to offset the video so that it matches up to the audio at the distance desired.  *A negative value will start video after audio and give the perception of delaying the video.
Audio-Video offset.png

KB ID: DD3650388

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.