Daktronics

How can I check what firmware my M2 or M3 controlled Galaxy display is running, using M2config Software Utility?

Topic

  • How can I check what firmware my M2 or M3 controlled Galaxy display is running?

Environment

  • M2config Software Utility
  • M2 controlled Galaxy displays
  • M3 controlled Galaxy displays

Steps

  1. You will need to download and install M2config Software Utility, follow: How do I download & install the M2Config Utility on my computer? - DD2059662.
  2. Connect to the display by following: How do I connect to my Galaxy display using the M2Config Utility? - DD2342713.
  3. Once connected select the Status tab at the top.
  4. Under the status tab there is Firmware Version information under the VERSION: heading.
    • M3 controlled displays utilize Firmware DD1425608.exe (used with Venus software packages) or DD1523458.exe (GNet used with Visiconn)
    • M2 controlled displays utilize Firmware ED13305.exe

Note - The actual firmware version will be listed after the DD or ED file of the M2 or M3 controller listed above.

 

KB ID: DD3493287

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.