Daktronics

Show Control System: How do I make a button for layout reset

Topic

  • What makes up a Reset Layout button in Display Studio?
  • Show Control's Display Studio script buttons

Environment

  • Product:
  • Components: Display Studio, DMP-7000, VIP-4400/VIP-4500
  • Control System: Show Control System (SCS)

Steps

If the system has DMP-8000 controlled displays, script the .layout files to all primary zones
  1. If your system has Venus Control Suite (VCS) installed with the DMP-8000s registered, layout files will be created and sent via this program and a reset layout button will not be needed as layouts are continuously pushed from VCS
  2. Follow Venus Layouts: How do I add a layout in Venus Control Suite? for more information
  3. Include both lines of script if you have DMP-7000 and DMP-8000 controlled displays.
  4. This button should be Yellow

Notes

  • This button should not to be pushed on a regular basis. Typically at the beginning of the events and then Blank All should be used to clear the displays.

KB ID: DD3389652

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.