How to configure settings for a Biamp Audia EXPI/O-2 I/O Expander

Topic

  • How do I configure settings for a Biamp Audia EXPI/O-2 Inputter/Output Expander?

Environment

  • Product:Biamp Audia EXPI/O-2 Input/Output Expander
  • Component: Sportsound 500HD, 1500HD, 2000HD
  • Control System:

 

Steps

  • Biamp settings can be configured using the LCD monitor and the control knob on the front panel of the the device.
    1. Ensure power is present to the Biamp (possibly on power strip).
    2. Press the control knob to enter setup.
    3. Edit settings to match the list of settings below. Use the control knob to switch to the next setting.
    4. If prompted for confirmation when making a change, use the control knob to select "OK" or "Cancel" and press the control knob to select option.
  • Biamp Settings (Should be set to exactly what is shown below):
    1. BUNDLE # TX = 00001 (Set to 00000 by default)
    2. BUNDLE # RX = 00000 (default setting)
    3. COBRANET LATENCY = 5.33ms (Default setting varies)
    4. INPUT GAIN CH1 & CH2 = +12dBu (Set to 0dbu by default)
    5. PHANTOM POWER = OFF (Default setting)
    6. OUTPUT GAIN CH1 & CH2 = 0dBu (Default setting)
    7. PASSWORD PROTECT = UNLOCK (Default setting)
    8. TITLE DISPLAY = AUDIA EXPI/O-2 (Default setting)
  • Refer to the Biamp Audia Series Manual  for more information about this device.

KB ID: DD2909756


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.