Daktronics

How do I install the UltraVNC server on a computer?

Topic

  • How do I install the UltraVNC server on a computer?
  • How do I install and setup UltraVNC on a computer to accept connections?

Environment

  • Product Family: Control System, Message Displays
  • Prodcut: Video Board, Galaxy Pro
  • Component: Venus 7000, DMP-7000
  • Control System:

Steps

 

  1. Navigate to http://www.uvnc.com/downloads/ultravnc.html
  2. Select the most up to date version available.
  3. Determine whether the version of the OS on the machine is a 64 or 32 bit version of Windows.
  4. Select the corresponding Installer.
  5. Do not click the large green Download button. Scroll to the bottom of the Downloads Summary page and put a check mark in the 'I accept the above listed conditions' check box and the click the small gray Download button to run the Install Wizard.
  6. Select your Language.
  7. Click Next on the Welcome window.
  8. Select 'I accept the agreement' and click Next on the License Agreement window.
  9. Click Next on the Information window.
  10. Click Next on the Select Destination Location window.
  11. Make sure UltraVNC Server and UltraVNC Client are both checked and Click Next on the Select Components window.
  12. Click Next on the Select Start Menu Folder window.
  13. Select all check boxes on the Select Additional Tasks window and click Next.
  14. Select Install on the Ready to Install window.
  15. After the Installer has ran click Next on the information window.
  16. Click Finish on the Completing the UltraVNC Setup Wizard.
  17. Right click on the WinVNC Service in the Taskbar (looks like a blue eye) and select Admin Properties.
  18. Under Authentication change the VNC and View-Only Passwords to the correct password.
  19. Under Incoming Connections change the ports to the correct port.
  20. Verify that UltraVNC Server is in the Startup folder for the computer. If not copy UltraVNC Server to this folder.

KB ID: DD2745365

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.