Daktronics

How to use reset 2 on a RC-100/RC-200 game/dog clock remote start/stop setup with All Sport 5000

Topic

  • How to do a double reset with RC-100 or RC-200 remote start/stop and All Sport 5000?
  • How to use reset 2 of RC-100 game clock/dog remote start/stop?
  • How to set and operate RC-100 game clock/dog remote start/stop for double reset?

Environment

  • Product: Sports Product
  • Component:
  • Control System: All Sport 5000, RC-100 game clock/dog remote start/stop 0A-1110-0106, System Riser DWG-319037, RC-200 game clock/dog remote start/stop 0A-1110-0074, system riser DWG-3660093

Steps

This only applies when the All Sport 5000 is using code 6601 (Football) which has the "RESET ON STOP" option. All Sports using code 5001 (Pitch Timer) follow How to use two Pitch Timing Resets with All Sport 5000 console and RC-200 handheld

  1. Code 98 only has one reset on it.
  2. This is the remote start/stop code and only has enough outputs to do start/stop and reset.
  3. If an end user wants 2 resets, it can be accomplished by setting the AS-5000 to have the play clock reset on stop.  This will allow them to get reset 1 when they stop the clock, and then the reset key will do reset 2.
    1. In All Sport 5000 set Play Clock Reset 1 and Play Clock Reset 2 as needed
    2. In All Sport 5000 set MENU > EDIT SETTINGS > PLAY CLOCK RESET ON STOP > to yes (Y)
      1. When RESET ON STOP is set to yes (Y) the STOP switch automatically resets the play clock using the RESET 1 time and the RESET switch uses the RESET 2 time
      2. When RESET ON STOP is set to no (N) the STOP switch does not reset the play clock and the RESET button uses the RESET 1 time

Related Article

KB ID: DD2439872

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.