Daktronics

FL-3000/4500: How do I factory reset a FL-3000/4500 series display with an FLR3-100/400 key fob

Topic

  • How do I factory reset a FL-3000/4500 series display with an FLR3-100/400 key fob?
  • How to reset to factory settings FL-3000/4500 Gas Price Displays with FLR3-100?

Environment

  • Product: Fuellight, FL-3000, FL-4500, Gas Price or Petroleum Price Display, FL digit product
  • Component: Key Fob/Remote
  • Control System: FLR3-100/FLR3-400 Key Fob (Wireless Communication Option), Handheld, Remote, Radio

Steps

  1. Perform a Factory reset.
  2. Note: Performing the factory reset will do the following: Drivers will all be set to automatic dimming mode, Line 1 address, and to FL-3000 setup w/ tails.
  3. Press and hold the up arrow (+) button and down arrow (-) button on Line 1(SYNC) and Line 4(TEST) at the same time.
  4. The decimal point for the first driver in line will start to blink. When it starts to blink let go of buttons.
  5. The Host driver will lose sync to the client drivers.  Wait 3 minutes so the reset is saved in memory and then power cycle the display so the host display re-initializes with the client displays.
  6. Address the display, reference FL-3000/4500: How to Line map, using key fob, Gas Price Displays
  7. Edit price, reference How to change price using a FLR-100 or FLR-400 Key Fob?

KB ID: DD2354592

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.