Daktronics

Venus 1500: How do I create a schedule or day in V3?

Potential Symptoms

  • Create a schedule in Venus 1500 V3

Environment

Venus 1500 V3

Resolution

  1. Click on the Schedule Studio from the Venus 1500 V3 Shell.
  2. Select New from the File pull-down menu.
  3. Select the display from Available Configurations and click OK.
  4. Enter text in the Description field.
  5. Using the Type Drop down, select Message.
  6. From the Open Message window, select the file name and click Open.
  7. Adjust the Start Time, Stop Time, First Date, Last Date as needed.
  8. Deselect any days of the week if needed.
  9. Drop down the File menu, select Save or Save As.
  10. Select the path for the schedules save location.
  11. Type in a File Name in the bottom right corner and click Save.
  12. Launch the Venus 1500 Display Manager from the Venus 1500 V3 Shell.
  13. Click the Schedule Control View or F3 on your keyboard.
  14. Filter through folders to locate the saved schedule.
  15. Double click or Right Click and Run to send the schedule to the display.

Note: For more information on scheduling with Venus 1500 V3.

  1. Go to www.daktronics.com/support.
  2. Under Manuals (bottom left of page), click on Software & Controllers.
  3. Under Venus 1500 Software, click on Venus 1500 V3 Manual.
  4. Follow steps in manual on scheduling starting on page 117.

KB ID: DD2342178

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.