DMP-8000: How do I integrate live video with a DMP that has a capture card

Potential Symptoms

What kinds of video does a DMP-8000 take?
- Depending on the kind of DMp-8000; Composite, S-video, Component, SDI, HD-SDI
How can you setup video into a DMP-8000?

Environment

Product: DMP-8000 / VNet
Components: video configuration
Control System: Custom video system

Cause

Some DMP-8000 hardware is equipped with a video capture card. The source option will select the capture card in the system. In systems with more than one capture card, say a Black Magic DeckLink and Intensity Pro, the way you differentiate between the two is with the number you use after "tvtuner". Generally, the Intensity Pro card will be 1 and the DeckLink card will be 2

Resolution

Composite:

This is an analog signal.
Connect a video source to the Composite input on the Black Magic DeckLink card: Composite video is connected using the Green- Y In cable.

Create a VMPL

<?xml version="1.0"?>

<vmpl>

</vmpl>

For more information, see DMP-8000 will not show composite video

S-video

This is an analog signal.
Connect a video source to the S-video input on the Black Magic DeckLink card: S-Video is connected using the Red- R-Y In and the Green- Y In

Create a VMPL

<?xml version="1.0"?>

<vmpl>

</vmpl>

Component

This is an analog signal.
If bringing it in using standard def, (DvD player) see DVD player is not outputting data to the DMP-8000 with an HDMI connection.
Connect a video source into the Component input on the Black Magic DeckLink card: Component video is connected to the Red, Blue, and Green cables.
You have to specify the format, followed by frame rate

Create a VMPL

<?xml version="1.0"?>

<vmpl>

</vmpl>

SDI

This is a digital signal.
Connect a video source to the SDI input on the Black Magic DeckLink card

Create a VMPL

<?xml version="1.0"?>

<vmpl>

</vmpl>

HD-SDI

This is a digital signal.
Connect a video source to the SDI input on the Black Magic DeckL?ink card
You have to specify the format for HD-SDI, either 720p or 1080i followed by frame rate

Create a VMPL

<?xml version="1.0"?>

<vmpl>

</vmpl>

-----------OR-----------

<?xml version="1.0"?>

<vmpl>

</vmpl>

Related Resources

How to stream video from another computer onto my video display

KB ID: DD2313903

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

Read the Full Disclaimer

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.