Daktronics

How to find Base Station information from RC-100/RC-200 handheld

Potential Symptoms

  • Finding firmware version information, sync, and channel information from my base station that my RC-100 handheld device is connected to.
  • Finding firmware version information, sync, bcast and channel information from my base station that my RC-200 handheld device is connected to.
  • How to see what channel or bcast that the RC-200 Base Station Receiver is set at.
  • How to see what channel that the RC-100 Base Station Receiver is set at.

Environment

  • Product: Wireless Base Station Receiver
  • Component: Base Station Firmware
  • Control System: RC-100/RC-200 Handheld Controller

Resolution

For RC-100 Setup:
DD2223959_Base_Station_Status_Information.png 
  • N.N = firmware revision
  • MMM = month
  • DD = date
  • YYYY = year
  • CC = channel number
  • If the Base Station is synchronized to another Base Station via a sync group, the bottom left corner of the LCD will display "Sync:" followed by the sync group number.
  1. Power on the RC-100.
  2. Resume or enter in the new code needed for the event to be played.
  3. Make sure you have connection from your RC-100 to the base station you are trying to acquire information from.
  4. Press the <ALT> key DD2223959_ALT.pngin the bottom left hand corner.
  5. Press the <CONNECT> key DD2223959_CONNECT.png in the upper right hand corner.
  6. The following screen will display below if the connection to the base station has been made.
  7. Press any key to return to normal operation.
For RC-200 Setup:
image.png
  • N.N = firmware version
  • XX = broadcast group #
  • YY = channel #
  • R = region (D for Domestic, I for International)
  • If the Base Station is synchronized to another Base Station via a sync group, the bottom left corner of the LCD will display "Sync:" followed by the sync group number.
  1. Power on the RC-200.
  2. Resume or enter in the new code needed for the event to be played.
  3. Make sure you have connection from your RC-200 to the base station you are trying to acquire information from.
  4. Press the <ALT> key DD2223959_ALT.pngin the bottom left hand corner.
  5. Press the <CONNECT> key DD2223959_CONNECT.png in the upper right hand corner.
  6. The following screen will display below if the connection to the base station has been made.
  7. Press any key to return to normal operation.

KB ID: DD2223959

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.