All Sport 5000: How to select what information will show on the At Bat, Time, Pitch Count, or H/E digits
Topic
- How to select what information will show on the At Bat, Time, Pitch Count, or H/E digits?
- Can I change what information shows on the "At Bat" digits when using an All Sport 5000 console?
Environment
- Product: Baseball Scoreboard
- Component:
- Control System: AS-5000 (Pitch Count requires firmware version 2.2.3 or greater)
Steps
For selecting the desired information displayed on the Time digit section. (At Bat, Time, Pitch Count)
- Select Menu -> Edit Settings -> Scroll to the "Time Display=#" setting.
- Select the number corresponding with the information wanting to be displayed in the "At Bat" section of the scoreboard.
- Depending on All Sport firmware version it will be one of two possible numbers.
-
0 = At bat.
-
1 = Time (default).
-
2 = Pitch count.
-or-
-
0 = Pitch count.
-
1 = Time (default).
- 2 = At Bat.
-
- Depending on All Sport firmware version it will be one of two possible numbers.
- Press Enter.
For selecting the desired information displayed on the H/E digit section. (H/E, Pitch Count, At Bat)
- Select Menu -> Edit Settings -> Scroll to "H/E Display = #" setting.
- Select the number corresponding with the information that is desired to display in the "H/E" section of the scoreboard.
- 0 = Pitch Count.
- 1 = H/E (Hits/Errors).
- 2 = At Bat.
- Please see the All Sport 5000 manual (PDF page 58, physical copy page 40) for more information.
KB ID: 000028792
DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.
DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.
The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.