Daktronics

Display Studio shows DMP-7000 and/or DMP-8000 has/is going to expire

Potential Symptoms

  • When opening Show Control Systems (SCS) Display Studio states DMP-7000 and/or DMP-8000  has or is going to expire.
  • Show Control Display Studio has been registered, but the status indicator shows the DMP-7000 and/or DMP-8000 as expired or about to expire.

Environment

  • Product: SCS Display Studio
  • Component: M3 controlled Message Display
  • Control System: SCL-2000 (This is only for the M3 Plug-in)

Cause

  • The V-net (DMP-8000) and V7000 (DMP-7000) was not deselected during the install of SCS Display Studio.
  • How to confirm registration type after registration is completed:
  1. Launch Show Control Display Studio.
  2. Click the Orange Application Menu -> About.
  3. Next to License:, it will tell you the type of license you have.
    • SCL-2000 should only have the M3 Plug-in Selected.
    • SCS-4000 should only have the DMP-7000 and/or DMP-8000 selected.

Resolution

Reinstall or modify SCS Display Studio:
  1. Close fully out of Display Studio and Content Studio.
  2. Go to Windows Start Menu -> Control Panel -> Programs and Features.
  3. Locate the Daktronics Display Studio software, right-click and choose Change/Modify.
  4. Click Ok to the prompt advising to close out of listed programs.
  5. Click Next.
  6. Select Modify, click Next.
  7. Do Not change Database Server, and click Next.
  8. Click on the down-arrow next to DMP-7000 and/or DMP-8000, select X This feature will not be available.
    • Make sure to leave M3 selected.
    • DD2003936_1.jpg
  9. Once all proper plug-ins are unselected and/or selected, click Next.
  10. If prompted to Automatically close and attempt to restart the Daktronics Nucleus Server, click Ok.
  11. Click Finish.
Below is an example of what should be selected and not selected for a M3 unit. DSTI is for sound systems only.
DD2003936_2.jpg
 

KB ID: DD2003936

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.