Daktronics

Display Studio: How do I mark in or mark out my clips in my Show Control System?

Topic

  • How do I mark in or mark out on my clips in a Display Studio button?
  • Show Control's Display Studio script buttons

Environment

  • Product: Display Studio, DMP-8000
  • Components: script buttons
  • Control System: Show Control System (SCS) Version 2.15+, Live Clips
DisplayStudio-Logo_Blue.png

Steps

Locate the mark in/mark out configuration.

For a script button, create a new or edit a script line. For details, see: Display Studio: How do I create script buttons in a Daktronics Show Control System

  1. DMP-8000 Player Control.
  2. Choose the zone.
  3. Select Create Playlist or Play and go to the next step. 
  4. Click add and select the content file(s) and click open.
  5. Click on Step 4

For a quick display button: create new button or right click on an existing button to edit. For details, see: Display Studio: How do I create and edit a quick display container and button?

  1. Import files for playlist. (mov, avi, etc.)
  2. Click on the Mark In / Mark Out icon.

Under the Mark In / Mark Out icon.  

  1. Select the file to edit.  This must be an animated file.
  2. Slide the bar to the desired starting point of the file. Click on the mark in button.   
  3. Slide the bar to the desired ending point of the file. Click on the mark out button.
  4. Once the points have been set, select another animated file to mark in/ mark out.  
  5. Save changes to the button.

Things to note:

  • Users can only set mark in and mark out individually.  Multiple files cannot be selected.
  • Mark in/ mark out is for animated files. 

KB ID: 000024660

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.