Daktronics

How to change the IP address on a VL-6700 display

Potential Symptoms

  • How to change the IP address on a VL-6700?

Environment

  • Product: VL-6700
  • Component: SBC (Single Board Computer)
  • Control System: NTCIP software

Resolution

  1. Login to the Web Interface.
    1. For assistance accessing the web interface, contact Daktronics Technical Support.
  2. Select Sign 1.
  3. Select Configuration.
  4. Select Communication.
  5. Select Ethernet.
  6. Select IP.
  7. Select Static. 
  8. Enter IP Address, then press ENTER.
  9. Enter Subnet Mask, then press ENTER.
  10. Enter Gateway, then press ENTER.
  11. Select Static for DNS.
  12. Select Static for DNS. Press Enter through all DNS information if it is not known or used. 0 will be entered for all information
  13. Wait for the changes to be made, and then press enter.
  14. Select Status to verify new IP address.
  15. Log out of controller by pressing the cancel button until back at login screen.

How to change Ethernet port number on a VL-6700 display DD4542679

KB ID: 000012467

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.