Display Studio Status Error red, Able to ping display but not able to transfer messages

Potential Symptoms

    • Status button in the bottom left-hand corner is red. Says M3: IP Address not responding.
  • Able to ping display but show control not connecting.
  • Restarting Daktronics Nucleus Service with no change to display connectivity status.
  • Display IP address shows ready in-Service Configuration menu but unable to transfer messages in Display Studio.

Environment

  • Product: Galaxy (M3)
  • Component:
  • Control System: Display Studio, Show Control

Cause

  •  Suspect corrupt content being sent to display.

Resolution

  1.  Connect with M2Config after closing Display Studio software.
  2.  Clear sign memory and reset display.
  3.  Open Display Studio and send messages to player with M3 File Manager.

*NOTE* Check to make sure (using M2Config) that there is plenty of memory available on the controller. If possible clear sign memory and make sure there's ample space for new content. 

KB ID: 000009473


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.