Daktronics

Display Studio Status Error red, Folder not found caused by Disk Data

Potential Symptoms

  •  Folder not found caused by Disk Data error in Display Studio
    Folder Not Found.jpg

Environment

  • Product: Show Control
  • Component:
  • Control System: Display Studio 1.18 on Windows XP; Display Studio on Windows 10

Cause

  • For Windows XP machines, simple file sharing is turned on.
  • For Windows 10 machines, IPV6 is enabled in network adapter settings   

Resolution

For Windows 10 Machines:

Set the preference for IPv4 over IPv6 in prefix policies.  

The File and Printer Sharing for Microsoft Networks box will also need to be checked in Ethernet Properties.

For Windows XP Machines:

  1.  Open up My Computer and go to Tools.
  2. Under tools click on Folder Options.
  3. Select the View tab and scroll down.
  4. Uncheck simple file sharing.
  5. This should switch the sharing options of the C:\Program Files\Daktronics\Nucleus Server from.

  6. Click on Permissions.

  7. Allow everyone to have full permissions for C:\Program Files\Daktronics\Nucleus Server.

 

    For Temporary Operation

    For Windows 10 Machines:

    1. Go to Network and Sharing Center > Change Adapter Settings
    2. Right-click on the ethernet adapter connected to the network and select Properties
    3. Uncheck box next to Internet Protocol Version 6 (TCP/IPv6)
    4. Click OK

    Note: You may also want to check to make sure the Disk Data folder is shared to Everyone with Full Control on Windows 10 machines in addition to the IPv6 disabling.

    KB ID: 000009331

    DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

    DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

    The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.