Daktronics

Venus Displays: How do I set default transitions for my display in Venus Control Suite?

Topic

  • How do I set default transitions for my display in VCS?
  • Effects- fade, dissolve, wipe, etc. 

Environment

  • Product: Venus Select, Venus Professional, Venus Enterprise
  • Components: Content Transitions
  • Control System: Venus Cloud-Based, Venus Local, DMP-8000 version 8.5.0 or later, DMP-5000 version 8.5 or later
Note: It may say in VCS under Displays>Transitions that this will only work for DMP-8000 8.6.0.0 or higher. That is untrue. Confirmed with Software Ops that that Transitions will work for both DMP-8000 and DMP-5000 so long as their revision is 8.5 or later. See Control System above.

🛠️Account administrators have access to change the display's settings.

    Steps

      Use the arrows to expand / collapse each section. 

      Locate transitions in the Displays App. 
      1. Log into Venus Control Suite. 
      2. Open Venus Display App from the Apps Menu located in the top right of the VCS landing page. 
      3. Click on an existing display to Edit.
      4. Click on the Code Compliance tab. 
      5. Locate Transitions.

      Screenshot 2023-10-30 162300.png

      Transition configuration
      1. Choose On to allow transitions. This will allow default transitions at a display level and playlist level. 
      2. Under Default Transitions, choose On. -This transition will apply to the display and all of its zones. 
      3. Pick a transition from the drop down. See: Venus Content Transitions: What are the default transitions for my display in Venus Control Suite?
      4. Choose a transition speed. There are 3 options: 
        • Slow = 0.6 seconds
        • Medium = 0.4 seconds
        • Fast = 0.2 seconds 
      5. Click Save.

      Transition Considerations 

      • Transitions are entry effects only on items.  A transition applied to a web presentation would happen on the 1st slide and not in-between different slides.
      • If Content Studio is used to create a sequence (presentation) with transitions built into it, then, there could be a scenario where there are two different transitions happening at the same time.  It would play out as:  
        VCS transition -> CS transition -> CS transition.

      Content transitions are part of the Venus Select Subscription level, please verify your subscription level on the Launchpad.  If you are in Venus Basic you will not be able to add or edit default transitions.  If you would like to upgrade your subscription, please contact technical support.  

      Legacy Process
      1. Log into Venus Control Suite.  See: Venus Accounts: How do I log in to Venus Control Suite?
      2. Choose Displays.
      3. Click on an existing display to Edit or Add New.
      4. Select Transitions.
        transitions1.png
      5. Choose Yes to allow transitions. This will allow default transitions at a display level and eventually playlist level. 
      6. Under Default Transitions, choose yes. -This transition will apply to the display and all of its zones. 
      7. Pick a transition from the drop down. See: Venus Content Transitions: What are the default transitions for my display in Venus Control Suite?
          transitions2.png
      8. Choose a transition speed. There are 3 options: 
        • Slow = 0.6 seconds
        • Medium = 0.4 seconds
        • Fast = 0.2 seconds 
      9. Click Save.

        Related Resources

        Venus Content Transitions: What are the default transitions for my display in Venus Control Suite? Using transitions for individual playlists. A user will be able to apply transitions to a playlist item at any time via the playlist item media constraints (back of the button) 

          KB ID: 000002657

          DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

          DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

          The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.