Daktronics

How to save and load a system backup file for a VFC

Topic

  • How do I configure a VFC from a USB Flash Drive?
  • How do I save a backup of a VFC's configuration and export it to another VFC?
  • How to backup a VFC from the webpage?

Environment

  • Product: Vanguard VF, VX, VM, VC6 displays
  • Component: VFC (Vanguard Field Controller); VFC/DMP-5000
  • Control System:

Steps

Method 1: Reconfiguring locally using a flash drive.
  1. Insert the flash drive into J3 on the back of the correctly configured VFC to copy its config file.
  2. Login to the VFC.
  3. Selected Shared.
  4. Select Backup.
  5. Select Export.
  6. Wait for it to finish.

 

  1. Insert the flash drive into the VFC to be configured.
  2. Login to the VFC.
  3. Select Shared.
  4. Select Backup.
  5. Select Import.
  6. Select the BIN file.
  7. Wait for it to finish.

 

  1. Login to the VFC.
  2. View the peripherals screen and wait for them to report correctly.
  3. View the version info screen to verify the modules and display interface are reporting correctly.
  4. Run a test pattern or a test message to verify the sign is displaying correctly.
Method 2: Reconfiguring from the webpage interface.
  1. This step can be done remote if the VFC's IP is known.
  2. Start with the correctly configured VFC.
  3. Log into the DMP web interface of the VFC.
    1. For assistance accessing the DMP web interface, contact Daktronics Technical Support.
  4. Select system backup from the column on the left.
  5. Select create system backup.

 

  1. Log into the DMP web interface of the VFC to be configured.
  2. Select system backup from the column on the left
  3. Select restore system backup.
  4. Select the ZIP folder that was created from the correctly configured VFC.
  5. Wait for the web interface to reload.

 

  1. Log into the car icon from the column on the left.
  2. Enter the Username: (this is sensitive information, contact technical support)
  3. Enter the Password: (this is sensitive information, contact technical support)
  4. View the peripherals screen and wait for them to report correctly.
  5. View the version info screen to verify modules and display interface are reporting correctly.
  6. Run a test pattern or a test message to verify the sign is displaying correctly.

KB ID: 000001668

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.