How to start an all on LED test on a Time /Temp, Rate, Lottery display using the DM-100?

Topic

  • How to start an All On LED test with the DM-100 for a Time and Temp display.
  • DM-100 LED test, All On.
  • How do I set the display into a digit LED test mode?
  • How do I display all 8's on the sign?

Environment

  • Product Family: Digit and Price Displays
  • Product: DF-1010, DF-1012, Time and Temp display, Rate display, Lottery display
  • Component: DM-100
  • Control System:

Steps

  1. Connect the DM-100 to the J-Box at the base of the display. The DM-100 should boot up and show a message showing "Display Sequence" or "Sequence Preview Edit to Modify".
  2. Press the <Menu> key, and then keep pressing the down arrow key until the message "LED TEST? Press <Enter> to test." is displayed.
  3. Press <Enter> and the message "Enter To Test, Clear To Exit". Press <Enter> again to start the test. To end the test press the <Clear> key.

* This test is useful for determining LED outages on the digits.

KB ID: DD2277736


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.