Daktronics

SLD: What settings should be used when display is mainly operated by a DMP - Daktronics Media Player

Topic

When an SLD is intended to be used daily with a DMP, there are settings that should be set to have the SLD automatically turn back on and select the DMP input after a power outage. This would allow customers turn off the display with a timer at the panel.

Environment

  • Product Family: 
  • Product: NovaStar Meetus
  • Components: SLD, MEE200
  • Control System: Conference Display System

Steps

Accessing the "Settings" Menu

1. Press the Home button (symbol of a house) on the remote
2. Select "More Apps"

3. Select the "Settings" App

Enable Power-on Self-start and Disable Assistive Touch
1. In the setting menu select "General"
2. Disable the "Assistive Touch" toggle
3. Disable Enable the "Power-On Self-Start" Toggle
4. Disable the "Delayed Power-Up" Toggle


Enable the Input which the DMP is connected to
1. In the setting menu select "General"
2. Select "Signal"

3. Under "Remember Settings", select the HDMI input which the DMP is connect to. 

KB ID: 000026636

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.