Daktronics

NPN-6200/5400: How To remove/replace a power supply on a display.

Topic

How to replace a Power Supply.
 

Environment

Product Family: NPN Series
Product: NPN-6200, NPN-5200, NPN-6400, NPN-5400
Component: Power Supply
 

Steps

Tools Needed:

Module Removal Tool
Phillips Screwdriver

Steps:

  1. Disconnect power to the display.
  2. If display is 1.2mm or below first remove the hub board following article "How To Remove/Replace a Hub Board On a NPN-6200/5400 Display" and then skip to step 4.
  3. Remove the support bar in the power supply area.
  4. Remove the two screws for the DC harness.
👉 The UHP power supply option will have four screws to remove.
  1. Remove the four screws securing the power supply brackets and then remove the power supply.
  2. Place the power supply horizontal and then remove the three screws for the AC harness.
  3. Reverse these steps to install a power supply.

KB ID: 000025768

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.